| INTERIOR PARTS |
DESIGNING YOUR OWN
INTERIOR
When designing your own interior
behind sliding doors, it is important to consider that behind
the point(s) where the doors overlap on 2 & 3 door wardrobes
there is an area that can't be accessed directly. The rules
are; don't position anything behind these points that pull
out i.e. drawers. Usually, it is enough to allow around 50mm
either side of the overlap to avoid a problem.
Where possible arrange the interior so that hanging rail is
used behind the overlaps. On 3 door systems, try to plan drawers
(if fitted) in the centre of the wardrobe behind the middle
door, and contain the drawers within 50mm of the overlaps.
Start to plan the interior by first deciding the position
of drawers (if fitted) which can be 400mm, 600mm or 800mm
wide, followed by stand width shelves and rails which are
also 400mm, 600mm and 800mm wide. Lastly, use the longer shelves
and rails (which can be cut down on site) to any size that's
needed for an interior that meets your exact storage needs.
We suggest that you look through the pole interior
"how
to" section before you start
planning, for an understanding of how the pole interior fits
together. |
|
 |
Central Pole (Floor to Ceiling
REF: PFS
A Central pole running from floor to ceiling from which to suspend drawers and shelves
|
Size:
Finish:
Price:
Quantity:
|
|
Central Pole (Floor to Wall)
REF: PFW
A Central pole running from floor to wall from which to suspend drawers and shelves
|
Size:
Finish:
Price:
Quantity:
|
|
 |
Shelf
REF: PSSW
Supplied edged all round. 18mm thick 458mm deep. Use as top shelf above wall mounted poles, or for cutting & edging on site where a variable factor is required
|
| Size | Price | | 400mm | £10.79 | | 600mm | £15.84 | | 800mm | £20.13 | | 2130mm | £44.44 |
|
|
Size
Finish
Price
Quantity
|
|
 |
Shelf Supports
REF: PSUS
supports for our wooden shelves, fix to central pole.
|
Size
Finish
Price
Quantity
|
|
 |
Glass Shelf
REF: PSSG
A glass shelf for fixing between central pole, to give an extra contemporary look to your wardrobe. supplied with fitting brackets.
|
| Size | Price | | 400mm | £28.02 | | 600mm | £35.39 | | 800mm | £42.85 |
|
|
Size
Finish
Price
Quantity
|
|
 |
Castors
REF: CAS
Castors to stand drawer unit on floor and to allow easy movement for accessibility and cleaning. Can also be used to convert 400, 600 and 800mm wide 2 drawer interior units into bedside cabinets.
|
Size
Finish
Price
Quantity
|
|
 |
Hanging Rail
REF: PSHR
A robust oval silver anodised hanging rail.
|
| Size | Price | | 400mm | £3.52 | | 600mm | £3.96 | | 800mm | £4.51 | | 1200mm | £5.50 |
|
|
Size
Finish
Price
Quantity
|
|
 |
Tie/Belt Holder
REF: PTBH
A holder for ties and belts. Dimensions: 85mm High x 130mmmm Wide x 430mm deep.
|
Size
Finish
Price
Quantity
|
|
 |
Trouser Holder
REF: PTH
A fold away trouser rack suitable for 4 pairs of trousers. Dimensions: 75mm High x 220mm Wide x 460mm Deep
|
Size
Finish
Price
Quantity
|
|
 |
Wire Tray
REF: PWT
Ideal for holding personal items. Size A Dimensions: 35mm High x 75mm Wide x 350mm Deep. Size B Dimensions: 60mm High x 160mm Wide x 450mm Deep.
|
| Size | Price | | Size A | £17.90 | | Size B | £25.98 |
|
|
Size
Finish
Price
Quantity
|
|
 |
Edging Tape
REF: PET
Use this iron on edging tape to edge panels which have been cut down on site or which do not come from us pre-edged.
|
Size
Finish
Price
Quantity
|
|
 |
Pull Down Hanging Rail
REF: PDHR
Pull down hanging rails make items on high rails more accesible.
|
| Size | Price | | 450mm | £60.85 | | 600mm | £64.02 |
|
|
Size
Finish
Price
Quantity
|
|
|
|
|